Installaton Instructions
Outdoor Pest Control is portable and easy-to-use.
It's easy to install the BuzzJr Portable Misting System. It is completely self contained, lightweight, automatic, and easy to use.
Step 1. Unroll the tubing, measure the area to be covered, and decide where you want to place the 3 emitters. Ideal placement for emitter nozzles is 8-10 feet apart.
The Portable Insect Misting System includes 3 emitters and 50 feet of tubing. The system covers an area of approximately 200 sq. ft. The coverage area can be enlarged by adding up to 7 additional emitters, or stubups, and 90 linear feet of tubing. See the ORDER page to purchase additional supplies.
Step 2. Cut the tubing at the points where you want to place emitter nozzles.
Step 3. Cut the tubing at the points where you want to place emitter nozzles.
Step 4. Use velcro straps to secure tubing and nozzles to supports.
Step 5. Insert the tubing end into the intake receptacle below the pump.
Step 6. Remove the reservoir cap. Pour entire contents of Liquid Gold into the reservoir then add water to fill line. Replace the cap.
Step 7. Set the timer. The timer allows you to set the duration of spray (1 to 90 seconds) and spray frequency. Effective insect control can be accomplished with as little as a 30 second spray 4 to 5 times a day.
ADDITIONAL RV AWNING INSTRUCTIONS :
Step 1. Pull out and set-up awning.
Step 2. Insert plastic tab portion of Awning Snap into track.
Awning Snaps, and other supplies, are available on the ORDER page.
Step 3. Attach awning steps to tabs.
Step 4. Secure tubing with Awning Snaps, attach tubing to the Portable Insect Misting System and prepare to enjoy an insect free outdoor environment.